Cart 0
Kelford V2-199 Camshaft Set - EJ20 WRX STI with AVCS (Versions 6 onwards)

Kelford V2-199 Camshaft Set - EJ20 WRX STI with AVCS (Versions 6 onwards)

$1,485.00

High Performance Cams for EJ20 WRX STI with AVCS (Versions 6 onwards)

 

This range of Kelford high performance camshafts is to suit the Version 6+ EJ20 engines with Subaru's awesome AVCS (Active Valve Control System).

This range of camshafts feature high velocity lobes that have a wider 'sweep' across the cam bucket, therefore these camshafts can only be used on shimless buckets or buckets that have the shim underneath. These profiles cannot run on the earlier 1999-2001 Version 5-6 buckets that have the shim on top.

Please note that the correct valve spring selection will depend on the installed height in your particular cylinder heads. Please contact us to discuss the correct valve spring selection.

 

Please note, these cams are easily identified by the triggers on the rear of the intake cams, they are machined to have four protruding 'paddle wheel' style triggers. If your engine has the three 'keyway / slot' style triggers, you need to see our EJ25 range with the R-199 part numbers.

 

V2-199-A Camshaft Set

256&252/260 Degrees advertised duration. 9.55mm&9.55mm/9.50mm lift.

High torque camshafts to suit near stock engines. Ideal in 36 mm restrictor classes.

V2-199-B Camshaft Set

264&260/260 Degrees advertised duration. 10.70mm&10.20mm/10.20mm lift.

Race and Rally camshafts. High lift, low duration design for great throttle response. Must have shimless buckets and aftermarket ECU.

V2-199-C Camshaft Set

272&268/268 Degrees advertised duration. 11.30mm&10.50mm/10.50mm lift.

High lift 272 degree racing camshafts. Requires cylinder head modification to fit. Suits well built competition motors. Good on E85 fuel. Must have shimless buckets and aftermarket ECU.

V2-199-D Camshaft Set

282&278/278 Degrees advertised duration. 11.50mm&11.00mm/11.00mm lift.

High Lift 282 degree duration racing cams. These cams require cylinder head modification to fit. Suits well built motors with larger intake manifolds. Good on E85 fuel. Must have shimless buckets and aftermarket ECU.

V2-199-E Camshaft Set

292&288/294 Degrees advertised duration. 11.00mm&11.00mm/11.00mm lift.

290 degree camshafts to suit high boost, high rpm Drag racing engines. Must be run with fixed timing, not suitable in variable situations.


Share this Product


More from this collection