Cart 0
TOMEI Dump + Front Pipe Mitsubishi Evo X CZ4A 4B11 - RIGHT HAND DRIVE

TOMEI Dump + Front Pipe Mitsubishi Evo X CZ4A 4B11 - RIGHT HAND DRIVE

$830.00

OUTLET COMPONENT  EXPREME for 4B11 EVOX

Larger, Optimized Flow
for More Power
KIT CONTENTS
OUTLET COMPONENT FLANGE NUT M12 * P=1.25
GASKET (TURBO SIDE) STICKER (EXPREME)
GASKET (CATALYZER) BOLT SMOOTH PASTE
CLAMP BAND INSTALLATION MANUAL
BLIND PLUG STICKER (TOMEI)
COPPER WASHER WARRANTY CARD
STUD BOLT M10-40 P=1.25 (THREAD 12/26)
PART NUMBER : 433001   
After testing a variety of shapes and pipe diameters here at Tomei R&D Lab, we found the optimum tuning point for the best performance balance. This design will extract the full capabilities from the EVO 10 4B11 engine. The design also retains the original layout to help with the ease of installation and compatibility for other exhaust parts.
■ WIDE MOUTH
The smooth flowing design, without steps from the turbocharger. Manufactured with the lost wax process, combines both strength and beauty.
■ 3 INCH PIPE
After numerous tests, the 3 inches (76.3mm) greatly increases both power and torque.
■ TORQUE & POWER
Wide mouth & 3 inch piping. Achieve large power & torque gains over stock.
Direct bolt on that retains the original stock layout.
Lost Wax casting process for maximum durability,
precision without welds.
Larger in size and diameter, smooth
without any steps.
The larger curve design makes it possible
for a much larger capacity.
Improved efficiency through with
a more linear layout. .
MATERIAL
PIPE DIAMETER (Φ)
PIPE LENGTH (mm)
FLANGE LENGTH (mm)
WEIGHT (kg)
TOMEI
SUS304
76.3
1.5
13-12
4.8
(With Accessories)
STOCK
STEEL
64.5
1.5
12-12
5.2
GOOD DESIGN FOR TOOLS
O2 SENSOR BOSS FOR AFR GAUGES
The wide mouth was designed to be easy to install with the general common work tools.
The mouting boss is an M18, which makes it easy to fit the AFR sensor. Comes with a blind plug to seal the hole when not in use.
FLEXIBLE PIPE DESIGN
MIKALOR HIGH GRADE BANDS
Easy to install with minimal risks to cracking the stainless steel exhaust manifolds from vibrations.
The Supra Bands made by MIKALOR is what we have chosen to use, since they maintain the strongest torque to secure a proper strong connection. We also used Nejiname bolts

Share this Product


More from this collection